Simpson Strong-Tie TW25114 Description

The Simpson Strong-Tie tie-wire anchor is designed for use in normal-weight concrete or in concrete over steel decking. This wedge-style expansion anchor features a tri-segmented, dual-embossed clip for enhanced performance.

Simpson Strong-Tie TW25114 Includes

• (100) Tie-Wire Wedge Anchor

Simpson Strong-Tie TW25114 Features

• 1/4″ eyelet for easy threading of wire
• Sets with claw of hammer
• Tri-segmented clip adjusts independently to hole irregularities
• Dual embossments enable the clip to undercut into the concrete
• Wedge-style expansion anchor for use in normal weight concrete or concrete over steel deck

Simpson Strong-Tie TW25114 Applications

• Acoustic ceiling grid installation
• Concrete over steel deck anchoring
• Normal-weight concrete anchoring

Simpson Strong-Tie TW25114 Installation Overview

1. Drill a hole at least 1 1/4″ deep using a 1/4″-diameter carbide tipped bit.
2. Drive the anchor into the hole until the bottom of the head is flush with the base material.
3. Set the anchor by prying/pulling the head with the claw end of the hammer.

Simpson Strong-Tie TW25114 Specifications

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values.