Simpson Strong-Tie SL50400HSS Description

The Sleeve-All Hex-Head Stainless-Steel Sleeve Anchor is a reliable mechanical anchor designed for solid base materials, offering optimal performance in structural applications.

Simpson Strong-Tie SL50400HSS Includes

• (25) Sleeve-All Hex-Head Stainless-Steel Sleeve Anchor

Simpson Strong-Tie SL50400HSS Features

• Pre-assembled expanding anchors for solid base materials
• Optimal performance in structural applications
• Available in various head options
• 304 stainless steel for corrosion resistance

Simpson Strong-Tie SL50400HSS Applications

• Securing into concrete and brick
• Hollow and grouted CMU anchoring
• Structural applications requiring reliable mechanical anchors

Simpson Strong-Tie SL50400HSS Installation Overview

1. Drill a hole in the base material using a carbide drill bit of the same diameter as the anchor.
2. Drill to the specified embedment depth and clean the hole using compressed air.
3. Place the anchor in the fixture and drive it into the hole until the washer and nut are tight against the fixture.
4. Tighten to the required installation torque.

Simpson Strong-Tie SL50400HSS Specifications

NOTE: Oversized holes will make it difficult to set the anchor and will reduce the anchor’s load capacity.