Simpson Strong-Tie SL25214A Description

Strong-Tie Sleeve-All wedge anchors are pre-assembled expanding anchors for use in solid base materials. They secure into concrete and brick to hollow and grouted CMU.

Simpson Strong-Tie SL25214A Includes

• (100) Sleeve-All Acorn-Head Sleeve Anchor

Simpson Strong-Tie SL25214A Features

• Pre-assembled expanding anchors
• Optimal performance in demanding structural applications
• Available in acorn, hex, rod coupler, and flat head options

Simpson Strong-Tie SL25214A Applications

• Securing into concrete and brick
• Hollow and grouted CMU applications
• Structural anchoring in solid base materials

Simpson Strong-Tie SL25214A Installation Overview

1. Drill a hole in the base material using a carbide drill bit the same diameter as the nominal diameter of the anchor.
2. Drill the hole to the specified embedment depth, and blow it clean using compressed air.
3. Place the anchor in the fixture, and drive it into the hole until the washer and nut are tight against the fixture.
4. Tighten to required installation torque.

Simpson Strong-Tie SL25214A Specifications

NOTE: Oversized holes will make it difficult to set the anchor and will reduce the anchor’s load capacity.