Simpson Strong-Tie THD50234RHP1 Description

The Titen HD Threaded Rod Hanger is a zinc-plated anchor designed for hanging threaded rods from concrete ceilings, ideal for applications like false ceilings, HVAC, and pipes.

Simpson Strong-Tie THD50234RHP1 Includes

• (1) Titen HD Threaded Rod Hanger

Simpson Strong-Tie THD50234RHP1 Features

• Thread design undercuts to efficiently transfer the load to the base material
• Serrated cutting teeth and thread design enable quick and easy installation
• Specialized heat-treating process creates tip hardness to facilitate cutting while the anchor body remains ductile
• Designed to install using a rotary hammer or hammer drill with standard ANSI drill bits
• Installs with standard-sized sockets
• Use in dry interior environments only
• Code listed for cracked and uncracked concrete applications under the 2015, 2012 and 2009 IBC/IRC, per ICC-ES ESR-2713
• FM listed

Simpson Strong-Tie THD50234RHP1 Applications

• Hanging threaded rods from concrete ceilings
• Supporting false ceilings
• HVAC installations
• Pipe hanging

Simpson Strong-Tie THD50234RHP1 Installation Overview

1. Drill a hole using the specified diameter carbide bit into the base material to the specified embedment depth plus minimum hole depth overdrill.
2. Blow the hole clean of dust and debris using compressed air.
3. Install with a torque wrench, driver drill, hammer drill or cordless impact wrench.
4. Fully insert threaded rod.

Simpson Strong-Tie THD50234RHP1 Specifications

NOTE: This anchor is designed to accept 1/2″ diameter threaded rod but has a 3/8″ shank diameter.