Simpson THDB25234H Description

The Titen HD Screw Anchor Zinc Plated is a high-strength anchor designed for quick and easy installation in cracked and uncracked concrete applications.

Simpson THDB25234H Includes

• (50) 1/4 in. x 2-3/4 in. Titen HD Screw Anchor Zinc Plated

Simpson THDB25234H Features

• Tested in accordance with ACI 355.2, AC193 and AC106
• Qualified for static, wind and seismic loading conditions
• Thread design undercuts to efficiently transfer the load to the base material
• Standard fractional sizes
• Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
• No special drill bit required designed to install using standard-sized ANSI tolerance drill bits
• Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
• Removable ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
• Use in dry interior environments only

Simpson THDB25234H Applications

• Concrete anchoring in cracked and uncracked conditions
• Temporary anchoring for formwork and bracing
• Interior dry environments

Simpson THDB25234H Installation Overview

1. Drill a hole in the base material using a carbide drill bit matching the anchor diameter.
2. Clean the hole using compressed air.
3. Insert the anchor through the fixture and into the hole.
4. Tighten the anchor until the hex-washer head contacts the fixture.

Simpson THDB25234H Specifications

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values