Simpson Strong-Tie ET3G56 Description

The ET-3G High-Solids Epoxy Anchoring Adhesive Cartridge is a two-component, high-solids, epoxy-based system ideal for anchoring threaded rods and rebar into concrete and masonry.

Simpson Strong-Tie ET3G56 Includes

• (1) 56-oz. side-by-side cartridge

Simpson Strong-Tie ET3G56 Features

• Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
• Ideal for doweling and threaded rod applications
• Available in bulk quantities for high volume applications
• Two-year shelf life for unopened cartridges stored between 45F (7C) and 90F (32C)

Simpson Strong-Tie ET3G56 Applications

• Threaded rod anchoring and rebar doweling into concrete and CMU
• Suitable for horizontal, vertical, and overhead applications
• Multiple DOT listings

Simpson Strong-Tie ET3G56 Installation Overview

1. Ensure surfaces to receive epoxy are clean.
2. Base material temperature must be 50F (10C) or above at the time of installation.
3. Store cartridges in a warm, uniformly heated area to warm cold material.
4. Mixed material in nozzle can harden in 30 minutes at temperatures of 70F (21C) and above.
5. Use only Simpson Strong-Tie mixing nozzles as per instructions.

Simpson Strong-Tie ET3G56 Specifications

Mix Ratio/Type 1:1 epoxy Mixed Color Teal Base Materials Concrete and masonry cracked and uncracked Base Material Conditions Dry, water-saturated Anchor Type Threaded rod or rebar Substrate Installation Temperature 50F (10C) to 110F (43C) In-Service Temperature Range -40F (-40C) to 150F (65C) Storage Temperature 45F (7C) and 90F (32C) Shelf Life 24 Months Volatile Organic Compound (VOC) 3 g/L

NOTE: NOTE: This item is NOT eligible for express shipping, and must ship via Ground only.